Linn K20 Speaker Cable 100m Drum
£1,500.00 inc. VAT
The Linn K20 Speaker Cable 100m Drum provides a complete reel of performance two-core cable for passive loudspeaker systems and custom installations.
- Complete 100-metre drum of Linn K20 speaker cable
- Performance two-core loudspeaker cable
- Two 54-strand copper conductors
- 4 sq mm conductor area per core
- Flexible grey outer sheath
- Supplied unterminated for custom installation
Installation note: The cable is supplied as an unterminated 100-metre drum. Cutting, routing, connector fitting and concealed installation are not included in the product price.
Your product details will be included with the order request. We will confirm availability and the final specification before taking payment.
The Linn K20 Speaker Cable 100m Drum provides 100 metres of performance two-core loudspeaker cable for passive speaker systems and custom installations.
It is supplied unterminated on a complete drum. Each run can therefore be measured, cut and finished for the amplifier, loudspeakers and room.
Performance two-core cable
Linn K20 Speaker Cable 100m Drum
The Linn K20 Speaker Cable 100m Drum is designed for conventional passive loudspeaker connections.
Each of its two conductors contains 54 strands of copper. Each core has a conductor area of 4 sq mm.
A flexible grey sheath protects the conductors and helps the cable follow practical routes around the listening room.
Complete 100m drum
A full reel for larger installations, multiple speaker runs or custom cable preparation.
Performance copper conductors
Each core contains 54 copper strands with a total conductor area of 4 sq mm.
Supplied unterminated
Each run can be measured, cut and fitted with connectors suitable for the system.
Built for passive systems
What is Linn K20 speaker cable used for?
Linn K20 carries the amplified audio signal from a power amplifier or integrated amplifier to passive loudspeakers.
It is a two-core cable, so it is suited to standard single-wire speaker connections.
It is not designed to replace an analogue interconnect, digital cable or Exakt Link connection.
Copper construction
Two 54-strand conductors
Each conductor contains 54 strands of 0.3 mm copper.
The total conductor area is 4 sq mm per core. This supports reliable signal transmission between the amplifier and loudspeakers.
The stranded construction also helps the cable remain flexible enough for neat installation.
Published electrical properties
Capacitance and inductance
Linn publishes a typical capacitance of 16 pF per metre at 1 kHz for K20.
The typical inductance is 0.93 µH per metre at 1 kHz.
These values can help an installer assess cable suitability when planning longer speaker runs.
Flexible installation planning
Why choose the Linn K20 Speaker Cable 100m Drum?
A complete drum is useful when several speaker runs are required.
It also allows the final cable lengths to be measured after the loudspeaker and amplifier positions have been agreed.
This reduces the risk of ordering individual lengths before the final route is known.
Prepared for the equipment
Cutting and terminating Linn K20 speaker cable
The cable is supplied without plugs or connectors.
The correct termination depends on the binding posts or sockets fitted to the amplifier and loudspeakers.
Polarity must remain consistent at both ends of every cable run.
Rococo Systems can advise on suitable connectors and professional cable termination.
Measure the route first
Planning speaker-cable lengths
Measure the planned route rather than the straight-line distance between the amplifier and loudspeaker.
Allow enough cable for furniture, bends, connection terminals and future equipment adjustment.
For a stereo system, plan both left and right runs before cutting the drum.
Specialist installation support
Plan the cable installation before cutting
Rococo Systems can help confirm cable quantities, routes and suitable terminations for a compatible system.
Cable-length planning
We can help estimate the cable required for the intended speaker positions.
Termination guidance
Suitable plugs and connection methods can be confirmed around the equipment.
Installation available
Cutting, termination and cable installation can be quoted separately where required.
Planning a custom installation?
Order the Linn K20 Speaker Cable 100m Drum
Purchase the complete drum, or contact Rococo Systems for help with quantities, routing and termination.
Read full Linn K20 Speaker Cable details and specifications
Linn K20 Speaker Cable 100m Drum specifications
The Linn K20 Speaker Cable 100m Drum is a complete reel of performance two-core cable for compatible passive loudspeaker systems.
Cable specification
System use
What is included?
The product includes one complete 100-metre drum of Linn K20 speaker cable.
Speaker plugs, terminations, wall plates and installation labour are not included.
Is Linn K20 supplied with connectors?
No. The cable is supplied unterminated.
Suitable connectors must be selected for the amplifier and loudspeaker terminals.
Is Linn K20 suitable for bi-wiring?
K20 is a two-core cable designed for a standard single-wire connection.
A bi-wire installation would normally require two cable runs per loudspeaker or a suitable multi-core cable.
Can Linn K20 be purchased in shorter lengths?
This product page is specifically for the complete 100-metre drum.
Contact Rococo Systems if you require custom lengths or terminated cable pairs.
Can Linn K20 be installed inside walls?
Do not assume the standard cable is approved for concealed or in-wall installation.
Any concealed route must comply with the relevant building, fire and electrical requirements.
Installation and termination
Professional cutting, connector fitting, testing and installation can be quoted separately.
Concealed cabling, building work, electrical work and specialist access requirements may add to the installation cost.
Warranty
The cable is supplied with the applicable Linn manufacturer warranty, subject to Linn’s current UK terms.
Damage caused by incorrect cutting, termination, routing or installation may not be covered.
| Product Type | Cables and Interconnects |
|---|---|
| Cable Type | Speaker Cable |
| Supplied length | 100 metres |
| Supply format | Drum |
| Termination | Unterminated |
